P4 - Range of automatic panel benders

  • MM
  • IN
MachineP4-2120P4-2225
Technical specifications  
Maximum length of incoming sheet (mm)24952815
Maximum width of incoming sheet (mm)15241524
Maximum diagonal that can be rotated (mm)25002820
Maximum bending force (kN)330590
Maximum clamping force (kN)530635
Maximum bending length (mm)21802200
Maximum bending height (mm)203254
Minimum thickness (mm)0.40.5
Maximum thickness and bending angle steel, UTS 410 N/mm2 (mm)

3.2 (±90°)
2.5 (±130°)
2.1 (±135°)

3.2 (±90°)
2.5 (±130°)
2.1 (±135°)

Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (mm)

2.5 (±90°)
2.1 (±125°)
1.6 (±135°)

2.5 (±90°)
2.1 (±125°)
1.6 (±135°)

Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (mm)

4.0 (±120°)
3.5 (±130°)

4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

 

 

MachineP4-2520  P4-3125
Technical specifications  
Maximum length of incoming sheet (mm)30503495
Maximum width of incoming sheet (mm)15241524
Maximum diagonal that can be rotated (mm)32003500
Maximum bending force (kN)660625
Maximum clamping force (kN)1060825
Maximum bending length (mm)25003100
Maximum bending height (mm)203254
Minimum thickness (mm)0.50.5
Maximum thickness and bending angle steel, UTS 410 N/mm2 (mm)3.2 (±90°)
2.5 (±130°)
2.1 (±135°)
3.2 (±90°)
2.5 (±130°)
2.1 (±135°)
Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (mm)2.5 (±90°)
2.1 (±125°)
1.6 (±135°)
2.5 (±90°)
2.1 (±125°)
1.6 (±135°)
Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (mm)4.0 (±120°)
3.5 (±130°)
3.0 (±135°)
4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

 

 

MachineP4-3220
Technical specifications 
Maximum length of incoming sheet (mm)3850
Maximum width of incoming sheet (mm)1524
Maximum diagonal that can be rotated (mm)4000
Maximum bending force (kN)660
Maximum clamping force (kN)1060
Maximum bending length (mm)3200
Maximum bending height (mm)203
Minimum thickness (mm)0.5
Maximum thickness and bending angle steel, UTS 410 N/mm2 (mm)

3.2 (±90°)
2.5 (±130°)
2.1 (±135°)

Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (mm)

2.5 (±90°)
2.1 (±125°)
1.6 (±135°)

Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (mm)

4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

 

 

MachineP4-4020  
Technical specifications 
Maximum length of incoming sheet (mm)4000
Maximum width of incoming sheet (mm)1524
Maximum diagonal that can be rotated (mm)4050
Maximum bending force (kN)660
Maximum clamping force (kN)1060
Maximum bending length (mm)400-32003200-38503850-4000
Maximum bending height (mm)203203 203
Minimum thickness (mm)0.5
Maximum thickness and bending angle steel, UTS 410 N/mm2 (mm)

3.2 (±90°)
2.5 (±130°)
2.1 (±135°)

2.5 (±125°)
2.1 (±130°)
1.6 (±135°)

1.6 (±130°)

Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (mm)2.5 (±90°)
2.1 (±125°)
1.6 (±135°)
2.5 (±90°)
2.1 (±120°)
1.6 (±135°)
1.3 (±120°)
Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (mm)

4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

4.0 (±120°)
3.5 (±130°)
3.0 (±135°)

2.5 (±125°)

MachineP4-2120P4-2225
Technical specifications  
Maximum length of incoming sheet (in)98.2110.8
Maximum width of incoming sheet (in)6060
Maximum diagonal that can be rotated (in)98.4111
Maximum bending force (kN)330590
Maximum clamping force (kN)530635
Maximum bending length (in)85.886.6
Maximum bending height (in)7.910
Minimum thickness (gage)2725
Maximum thickness and bending angle steel, UTS 59500 psi (gage)

11 (±90°)
13 (±130°)
14 (±135°)

11 (±90°)
13 (±130°)
14 (±135°)

Maximum thickness and bending angle stainless steel, UTS 84200 psi (gage)

2.5 (±90°)
2.1 (±125°)
1.6 (±135°)

13 (±90°)
14 (±125°)
16 (±135°)

Maximum thickness and bending angle aluminium, UTS 38500 psi (gage)

4.0 (±120°)
3.5 (±130°)

7 (±120°)
8 (±130°)
9 (±135°)

 

MachineP4-2520 P4-3125
Technical specifications 
Maximum length of incoming sheet (in)120137.6
Maximum width of incoming sheet (in)6060
Maximum diagonal that can be rotated (in)126137.8
Maximum bending force (kN)660625
Maximum clamping force (kN)1060825
Maximum bending length (in)98.4122
Maximum bending height (in)810
Minimum thickness (gage)2525
Maximum thickness and bending angle steel, UTS 59500 psi (gage)

11 (±90°)
13 (±130°)
14 (±135°)

11 (±90°)
13 (±130°)
14 (±135°)

Maximum thickness and bending angle stainless steel, UTS 84200 psi (gage)

13 (±90°)
14 (±125°)
16 (±135°)

13 (±90°)
14 (±125°)
16 (±135°)
Maximum thickness and bending angle aluminium, UTS 38500 psi (gage)

7 (±120°)
8 (±130°)
9 (±135°)

7 (±120°)
8 (±130°)
9 (±135°)

 

 

MachineP4-3220
Technical specifications 
Maximum length of incoming sheet (in)151.5
Maximum width of incoming sheet (in)60
Maximum diagonal that can be rotated (in)157.4
Maximum bending force (kN)660
Maximum clamping force (kN)1060
Maximum bending length (in)126
Maximum bending height (in)7.9
Minimum thickness (gage)25
Maximum thickness and bending angle steel, UTS 59500 psi (gage)

11 (±90°)
13 (±130°)
14 (±135°)

Maximum thickness and bending angle stainless steel, UTS 84200 psi (gage)

13 (±90°)
14 (±125°)
16 (±135°)

Maximum thickness and bending angle aluminium, UTS 38500 psi (gage)

7 (±120°)
8 (±130°)
9 (±135°)

 

MachineP4-4020  
Technical specifications 
Maximum length of incoming sheet (mm)157.48
Maximum width of incoming sheet (mm)60
Maximum diagonal that can be rotated (mm)159.45
Maximum bending force (kN)660
Maximum clamping force (kN)1060
Maximum bending length (mm)17.75-126126-151.57151.57-157.48
Maximum bending height (mm)88 8
Minimum thickness (mm)25
Maximum thickness and bending angle steel, UTS 410 N/mm2 (mm)

11 (±90°)
13 (±130°)
14 (±135°)

13 (±125°)
14 (±130°)
16 (±135°)

16 (±130°)

Maximum thickness and bending angle stainless steel, UTS 660 N/mm2 (mm)13 (±90°)
14 (±125°)
16 (±135°)
13 (±90°)
14 (±125°)
16 (±135°)
18 (±120°)
Maximum thickness and bending angle aluminium, UTS 265 N/mm2 (mm)

7 (±120°)
8 (±130°)
9 (±135°)

7 (±120°)
8 (±130°)
9 (±135°)

11 (±125°)

Values refer to a standard machine. Salvagnini reserves the right to modify this data without warning.

P1
Developed to fit in 8sqm, designed to produce with just 3 kW and optimized to astound you with its bending speed, the P1 is the solution Salvagnini is offering as an alternative to traditional bending.
more info
P2
P2 is the ultimate panel bender able to efficiently produce a large variety of parts. Totally automatic, it guarantees that the first part is a good part.
more info
P4
40 years of automatic panel bender P4: simply our trademark.
Welcome to factory 4.0.
more info
L3
L3, the fiber laser build for fiber, is a productive, versatile solution that is both environmentally and user friendly
more info
L5
With the Salvagnini single-optic cutting head, the compass structure and the cutting parameters developed specifically for it, the L5 provides quality cutting across a wide range of thicknesses with high dynamics.
more info
B3
The B3 was designed by combining the features and benefits of electric and hydraulic press brakes with Salvagnini's in-depth knowledge of automation, software, mechanics and electronics.
more info
ROBOFORMER
The press-brake cell with a single controller and single program, ideal for automatic light-out solutions. A single machine capable of satisfying all your production needs accurately and effectively.
more info
S1
S1 implements innovative and original elements, that make it a solution with a wider range of applications, that goes beyond common similar technology and is unique in the market.
more info
S4
S4Xe has everything in the right place: a multi-press head for multiple and independent processing, an integrated shear for kit production without waste, an automatic manipulator for precise movements and an optimized machine center for smooth control with no surprises.
more info
FlexCell
FlexCell combines the features of a Salvagnini panel bender and a press-brake and is the only solution of its kind on the market for getting the most out of bending.
more info
S4 + P4 line
Flexible manufacturing system. The S4+P4 line is one of Salvagnini’s most popular solutions. It punches, shears and bends sheet metal totally automatically. The first prototype dates back...
more info
MV Automatic tray store
MV automatic tray stores act as a backbone for the entire factory, coordinating and moving automatically the materials needed for the different machining processes just in time, reducing transfer costs and times, while increasing machine efficiency.
more info
Automatic Job Shops
In an AJS™ system, panel production through punching, shearing, laser cutting and/or bending is both automatic and flexible, satisfying a wide variety of production strategies, such as lean...
more info
renews
B3.170-4250 Press Brake
Year of manufacture: 2018
Warranty: 12 months
Market of destination: Austria • Belgium • Bulgaria • Croatia • Czech Republic • Denmark • Estonia • Finland • France • Germany • Greece • Hungary • Ireland • Italy • Lithuania • Montenegro • Netherlands • Norway • Poland • Portugal • Romania • Russian Federation • Serbia • Slovakia • Slovenia • Spain • Sweden • Switzerland • Turkey • United Kingdom
CE declaration: Yes
Go to details
renews
P4-2525 Panel Bender
Year of manufacture: 2008
Warranty: 12 months
Market of destination: Argentina • Australia • Bangladesh • Bhutan • Bosnia and Herzegovina • Brazil • Canada • Chile • China • Colombia • Congo • Costa Rica • Cyprus • Dominican Republic • Ecuador • Egypt • El Salvador • Estonia • Guatemala • Hong Kong • India • Indonesia • Israel • Italy • Japan • Kazakhstan • Kenya • Korea, Democratic People's Republic of • Korea, Republic of • Latvia • Lebanon • Libya • Lithuania • Malaysia • Mauritius • Mexico • Montenegro • Morocco • New Zealand • Panama • Paraguay • Peru • Philippines • Puerto Rico • Qatar • Russian Federation • Saudi Arabia • Serbia • Singapore • Slovakia • Slovenia • South Africa • Sri Lanka • Syrian Arab Republic • Taiwan, Province of China • Thailand • Turkey • Ukraine • United Arab Emirates • United States • Uruguay • Venezuela, Bolivarian Republic of • Viet Nam
CE declaration: Yes
Go to details
renews
L3-30 Laser Cutting
Year of manufacture: 2012
Warranty: 12 months
Market of destination: All countries
CE declaration: Yes
Go to details